Call: 08048744917 Send Email
Company Logo

our products

Cable Trays Raceways Storage Systems

Home » Infrastructure & Facilities

Infrastructure & Facilities

Aditya Steel Industries understand the relevance of having strong infrastructure, thus we have built a state of art infrastructure. We have installed advanced machinery and equipment in building a world class infrastructure. We have highly skilled individuals, who hold expertise in their departments and understand the market requirements. Our strong infrastructure gives us the opportunity to lead the market as we have lager product line, production capacity, world level R&D department.

Our infrastructure is divided among the following units:
  • Research and development unit
  • Warehousing and logistic unit
  • Manufacturing unit
  • Quality testing unit
  • We have achieved the stage, where all are products has features such as high load bearing capacity, light in weight, durable finish standards, available in different sizes and easy to install.

1.Shearing machine4MM02SHEARING
2.Automatic Perforated Machine500 tons02Perforation up to 1200mm width
3.Automatic Perforated Machine300 tons02Perforation up to 750mm width
4.Heavy Brake press80 tons02Bending
5.Power Press50 tons02For side punching
6.Power Press30 tons02For Rungs
7.Power Press20 tons02For shelves
8.Shearing machine2mm02Shearing
9.Shielded Arch welding machine250 amp.05Welding
11.Powder coated PlantPentac01For coating
12.Hand drillHitaichi10Drilling
13.Spray gun with compressorsMotherson5For Painting
14.Gas Welding/Cutting Set--------------02Welding/Cutting
15.Angle Cutter------------10Cutting Angle
16.Snip---------08For sheet Cutting/Finishing
17.Tool KitsTaparia20For Misc. Use
18.Generator Three Phase 25 KVA02For Power Back Up
19.D.G. SET Three Phase66 KVA01For Power Back Up
20.G.I. Hot Dip Plant tie up with M.T. Engineering Works Pvt. Ltd, Okhla, Delhi  Which are approved by DEL and EIL
21.Codes & Standard / Material  Complying with the specification of NEC and NEMA, steel as per IS: 1079/513, Galvanizing as per IS: 2629/4759

1.Raw Material ProcurementAll incoming raw material to be reviewed for supporting Manufacttrer's Test Certificate. Material not supported by Rejected lots, if any, to be rettrned to vendor.
2.CroppingFirst piece of every sheet to be checked by supervisor & Subsequently every 50th piece to be checked by operator. Rejected material, if any, to be rectified / converted in to Smaller members of scrapped.
3.PunchingFirst piece of every punched sheet to be checked by supervisor. To ensure the correctness as per drawing. Bulk Punching to be Carried out only after supervisor's approval.
4.Side punchingHoles to be perpendicular to surface. punch & die immediately replaced In case burring is observed. Checked by supervisor.
5.Edge Security & Hole to hole DistanceFirst piece of every member to be checked by supervisor to ensure accuracy of edge security and hole to hole distance. Bending at the angle of 90 degree .
6.WELDINGFirst piece of every member checked by supervisor to its dimensions, accuracy, as per drawing & welded spot. after approval bulk production starts.
7.Heel GrindingAfter grinding the rough surface or to remove the carbon from welded surface to make the smooth one each piece checked by foreman & randomly inspected by supervisor.
8.Touching/finishingFinishing is observed by foremen If found finishing is not good rejected the piece . Also inspected by supervisor
9.Rectification of rejected members Members not rectified to be scrapped
10.PaintingBefore painting the material, it goes pre paint treatment such as cleaning, degreasing, degusting, using three-in-one chemical. Primer is applied and after primer painting is done and then packed.

Looking for Product Name ?


Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name